Sundance Digital Signal Scatefication,Inc。产品

FMC-CL,Cameralink Frame-Grabber FMC

模型:FMC-CL

Sundance数字信号处理,Inc。

FMC-CL,亚拉玛拉克框架 -  Grabber FMC的图像 FMC / CL是相机链路FMC(FPGA夹层模块),可将界面,中型,介质和双完全和扩展的全摄像头链路兼容相机接口。FMC / CL具有各种I / O功能 - 2 x SATA连接器和4个CL连接器,也可用作通用I / O.下表显示了基于所使用的FPGA卡的硬件提供的模式和支持。Interface LPC Carrier HPC Carrier Single Base CL v v Dual Base CL v Quad Base CL v Single Medium CL v v Dual Medium CL v Single Full / Extended Full CL v v Dual Full / Extended Full CL v FMC-CL is supported by Sundance DSP PXIe700, and K800 PCIe FPGA boards using Xilinx Kintex series. The IP core for capturing the frames from the camera(s) is included. An extension PC bracket and flex cables allows the use of two cameras in Full/Extended modes. PXIe700 and K800 are 100% user programmable with an open FPGA that enables users to implement their proprietary image and signal pre-processing algorithms. Custom functions can use XC7K325T-1FFG900C or XC7K410T-1FFG900C (optional industrial grade) FPGAs. This module can be expanded/pipelined using additional FPGAs if necessary. PXIe700 has also 2 banks of DDR3 memory, 1GB each, 32-bit wide and 128 MB FLASH. PXie700 has 10Gb Ethernet or Fiber Optics communication links. Features •Dual Base, Quad Base, Medium, Full and Extended Full CL configuration •PoCL (Power over Camera Link) support •Up to 85 MHz data rate •ESD protection for all Camera Link signals •Optional Dual SATA for direct disk interface •LPC (low pin count) and HPC (high pin count) •Commercial and Industrial grades

来自Sundance Digital Signal Signing,Inc。的其他产品